網站首頁
產品目錄
最新產品-1
最新產品-2
最新產品-3
電子級壓力調整器
雷射切割機(激光切割機)
專業分析級調整器
CNC自動切管機
文件下載
日本TANAKA田中牌原廠宣告
聯繫我們
最新消息

電子級壓力調整器 

半導體氣體用調整器 (I)超高純度氣體用調整器 --- SUPER-TORR之特點 ---- --0.1μm 等級10之無塵室內組裝.(但S-TORRIII磨光等級X者除外) --連接部位採用熔接(本體/接管).金屬氣封,降低外部洩漏. --根據接觸氣體金屬部位之複合電解磨光處理(*1)及縮小容積至脫泡,塵粒減少. --S-TORRII系列用於強腐蝕性氣體,備有採用接觸金屬部位使用高耐防蝕性合金赫史特合金之1800系列及重要部位使用赫史特合金之E1800系列調整器.強化並提昇腐蝕性氣體可使用期間及安全性.(*2) --S-TORRIII系列為能處理腐蝕性氣體,重要部位採用赫史特合金之[SH系列]調整器為標準品. --用於負壓控制,低蒸氣壓氣體,S-TORR系列備有[膜片/閥座連接型]之A10系列調整器. --備有針對各種氣體最適宜之樹脂,可充分滿足各項要求. --內藏防範由上流側混入液物之過濾器, 大幅降低內部洩漏.(但S-TORR H50WV系列/S-TORR 150系列除外) --全數實施氦氣洩漏測試,塵粒測試.(但S-TORRIII之塵粒測試為選購品) --小型但展現高性能流量. --高壓氣體認證品可製作. (*1)S-TORRIII系列含無磨光,計有3種磨光規格為準. (*2)關於強腐蝕性氣體,腐蝕性氣體,依據客戶使用方式,可供使用期限差異頗大,一般SUS與赫史特合金相較,後者使用故障率較小.另外,因壓力計,膜片等壁厚較薄部分腐蝕外漏發生較少. .

------ 系列名稱與用途 ------- 1.For Piping (1)S-TORRIII 30Sr. *For non-corrosive semiconductor gases.(SHsr. For corrosive gases) *Standard type. *Norminal flow : 90NL/min(nor) at P1=1.5MPa and P2=0.6MPa *Consult the Hsin Teng Trading Co.,Ltd when using at 200cc/min or less. (2)S-TORRIII 50sr. *For non-corrosive semiconductor gases.(SHsr. For corrosive gases.) *For medium flow rate. *Norminal flow : 400NL/min(nor) at P1=1.5MPa and P2=0.6MPa (3)S-TORR 150sr. *For non-corrosive semiconductor gases. *For high flow rate. *Norminal flow : 1,200NL/min(nor) at P1=1.5MPa and P2=0.6MPa 2.For Corrosive Gases (1)S-TORRII 1800sr. *For highly corrosive gases. *Using high anti-corrosive alloy Hastelloy on all the surfaces contacting gas. *Example of norminal flow : HCL 35NL/min,CL2 10NL/min. (2)S-TORRII E1800sr. *For corrosive gases. *Using high anti-corrosive alloy Hastelloy on all the surfaces contacting gas expect for the body and joints. *For uses not requiring the Super-TORRII 1800sr. *Example of norminal flow : HCL 35NL/min , CL2 10NL/min. *Consult the Hsin Teng Trading Co.,Ltd that Super-TORRII E1800sr. can not full fill the flow rate requirement. 3.For High Inlet Pressure Gases. (1)S-TORRII 1300sr. *For non-corrosive semiconductor gases in cylinders.(1800sr. for corrosive gases) *Standard model. *Norminal flow : 80NL/min(nor) at P1=10MPa and P2=1MPa *Consult Hsin Teng Trading Co.,Ltd when using at 200cc/min or less. (2)S-TOORII 2300sr. *For non-corrosive semoconductor gases in cylinders. *For not only compressed gases but also for liquefied gases. *For medium flow rate. *Norminal flow : 400NL/min(nor) at P1=10MPa and P2=1MPa. 4.Special Purpose Regulator (1)S-TORR H50WVsr. *For non-corrosive semiconductor gases. *For high pressure use with pressure and gas tightness testing. *Norminal flow : 20NL/min(nor) at P1=10MPa and P2=3MPa. (2)S-TORRIII A10sr. *For non-corrosive semiconductor gases.(SHsr. For corrosive gases) *For use requiring negative pressure control. *For pressure control on low vapor pressure gases

過濾器(LINE FILTER) ---------- 特性(FEATURES) ---------- --HIGH PRECISION:This product is made of stainless steel 316L for TLF series, and 316 for SHF series as its material. The low pressure line filter TLF series uses a Teflon membrane for a filter element to remove efficiently smaller particles than those specified in the specifications thanks to uniform mesh size on the element. --GAS TIGHTNESS:All the joints are welded and the manufacturer guarantees1.3 ×10-10Pa.m3/sec or less of leakage to outside. --INTERNAL SURFACE POLISHING:The low pressure line filter TLF series can supply highly clean gases because its internal surface is polishing finished as standard. --SMALL SIZE AND LIGHT WEIGHT:The line filter is small and light,thus it saves spaces for piping. ---------- 用途(APPLICATION) ---------- This filter is appropriate for gas lines requiring high purity keeping such as gases for semiconductor ,and analysis,etc.


網站首頁  |  產品目錄  |  最新產品-1  |  最新產品-2  |  最新產品-3  |  電子級壓力調整器  |  雷射切割機(激光切割機)  |  專業分析級調整器  |  CNC自動切管機  |  文件下載  |  日本TANAKA田中牌原廠宣告  |  聯繫我們  |  最新消息  |  網站地圖  |  手機版
  繁體版     English     简体版
Powered by DIYTrade.com